Differences

This shows you the differences between two versions of the page.

--- linux:raspberry:wde:usbwde [2015/06/15 15:42] – lunetikk
+++ linux:raspberry:wde:usbwde [2020/01/15 12:35] (current) – lunetikk
@@ Line 3: / Line 3: @@
 ==== Info ====
-[[http://www.elv.de/-353.html|ELV-Shop -> USB-WDE]]
+[[https://de.elv.com/elv-usb-wetterdaten-empfaenger-usb-wde1-2-104656?fs=1640358625|ELV-Shop -> USB-WDE]]
 ==== Installation ====
-On the Pi you simply need to activate the drivers. Check if it is already activated with <code>lsmod | grep cp210x</code>
+On the Pi you simply need to activate the drivers. Check if it is already activated with <code bash>lsmod | grep cp210x</code>
 You should now see nothing or else it might already be activated.
-Insert "//cp210x//" into "///etc/modules//" and/or execute "//modprobe cp210x//".\\
+Insert "//cp210x//" into "///etc/modules//" and execute "//modprobe cp210x//".\\
 After a reboot you should be able to see the WDE listed with "//dmesg//"
-<code>lunetikk@weather:~# dmesg | grep WDE
+<code bash>lunetikk@weather:~# dmesg | grep WDE
-[   21.746023] usb 1-1.3: Product: ELV USB-WDE1 Wetterdatenempf\xffffffc3\xffffffa4nger
 [   45.750999] usb 1-1.3: Product: ELV USB-WDE1 Wetterdatenempf\xffffffc3\xffffffa4nger
 </code>
@@ Line 18: / Line 17: @@
 With the Software "Socat" you can do a testrun to check if your WDE finds your device and receives data.
-<code>sudo apt-get install socat
+<code bash>sudo apt-get install socat
 sudo socat /dev/ttyUSB0,b9600 STDOUT
@@ Line 30: / Line 29: @@
 Check my scriptsite [[linux:raspberry:wde:scripts:reader|Socatreader]]
-==== Create graphes ====
+==== Create graphs ====
 Good explained right here: [[http://www.kompf.de/weather/technik.html|Kompf(german)]]
@@ Line 41: / Line 40: @@
 \\
 \\
-~~DISCUSSION~~
+~~DISCUSSION:closed~~

Lunetikk's IT Wiki

User Tools

Site Tools

Differences

Page Tools